You are currently viewing How to Rototill a Lawn

How to Rototill a Lawn

How to Rototill a Lawn: A rototiller may be used to improve the appearance of a lawn or to prepare the soil for fresh seed or sod. However, in order to get the greatest results, you must first understand how to properly prepare the yard and utilise the equipment. If you want to bring a dying grass back to life, follow these eight steps while rototilling it.

How to Rototill a Lawn

Gather Resources

Make sure you have everything you need before you begin rototilling the lawn. Begin by placing a reservation for a rototiller that suits your needs. Check that the equipment has the appropriate tine diameter, breadth of tilling, and depth of tilling for the task. Some tasks can only be completed with a tiller and specific accessories. Look for a tiller that can be turned forward, has tine shields, or can be hooked to other equipment.

The next step is to locate or employ a sod cutter to remove the current grass. If you want to perform any gardening, you’ll need a rake and a tiller attachment. Spread mulch or fertiliser equally throughout the ground in length and breadth. When you’re through tilling, the sod should be ready to lay.


Prepare everything

After you’ve ensured that you have everything you need, you can begin setting up your business. Keep in mind that rototillers are fairly strong. They can’t travel through rocks or other thick materials, no matter how powerful they are. Remove any rocks, stones, sticks, or other garbage from the area before you begin tilling. Determine the location of large tree roots so that you can work around them.


Take out the grass.

Next, consider if you need to trim any of the existing grass. If you’re in a rush, you may skip this step, but bear in mind that the ultimate result may not be as nice if the sod isn’t removed. Putting tiles directly on top of the sod will not solve major issues like weeds or erosion. To properly remove the grass, a sod cutter should be utilised.


Examine the ground to check whether it is damp.

The soil must be wet but not drenched for a rototiller to function properly. The dirt will stay together if there isn’t enough water. Allow the area to dry after you have watered it. Muddy ground indicates that it is too damp to work in. Allow the dirt to dry so that you can easily break it up with your hands.


Applying mulch and fertiliser

Spread mulch or composted fertiliser over the soil with a rake before tilling it. An additional two inches of covering is usually suggested. The tilling machine will blend the material into the soil as you work it. The compost or fertiliser will improve the soil’s health and assist repair any harm that has already occurred. When sodding or growing fresh grass, using compost or fertiliser might be beneficial.

How to Rototill a Lawn

Rototiller should be adjusted.

Before using the rototiller, check the settings and make any necessary modifications. The ideal tiller depth is between 4 and 6 inches, which is suitable for the great majority of situations. If the depth is set too low, you may not be able to properly till the soil. If you go too deep, you can run across rocks or tree roots. Both of these things should be avoided if you want the rototiller to maintain performing properly.


Prepared for the Lawn

You may now till the grass after preparing the land and setting up the rototiller. Apply the same amount of pressure to the lawn’s surface using the rototiller. If you want the greatest results, work the dirt in rows, similar to how you would mow your lawn.

Even if you’ve previously discussed something, it doesn’t mean you should stop talking about it. Use a pattern that runs in a straight line over the surface. Make certain that you don’t miss even a centimetre. Planting and development may be difficult if just a portion of a field is tilled.


Install grass seed or sod.

After you’ve finished rototilling the grass, spend a few minutes raking it. Check that the surface is clean and that any debris or dust has been removed.

Allow the building site a week or longer to relax. After that period has gone, you should double-check to ensure that no new growth has appeared. Till the soil again if weeds have taken over.

The last stage before harvest is to determine whether or not your tilling was successful. Put down fresh sod or sow seeds to revitalise the soil.

A rototiller may be used to reseed any size garden or lawn, as well as re-sod an existing grass. To rent a rototiller, call Big Rentz at (888) 242-4715 as soon as possible.

Leave a Reply